SENTRON Power Meter


 

The SENTRON PAC4200 is a feature packed power monitoring device that is suitable for use in industrial, government and commercial applications where basic to advanced metering, logging, and I/O is required. The meter may be used as a stand alone device monitoring over 200 parameters or as part of an industrial control, building automation or global enterprise wide monitoring system. 


PAC4200 Power Meter  Features

  • Basic to advanced metering up to 200 parameters
  • Load profile and event logging
  • Automation integration
  • Modbus gateway for downstream serial devices
  • Harmonics measuring Volt/Amp 3...31st
  • Phase angle / Phase chart
  • Option Expension module for 4DI/2DO
  • Operating hours counter
  • Limit monitoring function
  • Logic function
  • Event log more than 4000 event
  • Gate way function
     
 

Communications

  • Ethernet integrated  (10 /100 Mbit/sec)
  • Modbus TCP integrated RJ45 port  (10/100  Mbit/sec) - STANDARD
  • PROFIBUS DP expansion module - OPTIONAL
  • Modbus RTU expansion module - OPTIONAL

Digital Inputs and Outputs

  • Digital input 24 Vdc / 0.7 mA   (2)
  • Digital output 12-24 Vdc / 10-27 mA  (2)

   The SENTRON PAC3200 is a powerful compact power monitoring device that is suitable for use in industrial, government and commercial applications where basic metering and energy monitoring are required. The meter may be used as a stand alone device monitoring over 50 parameters or as part of anindustrial control, building automation or global power monitoring system.

PAC3200 Power Meter  Features

  • Replace Multiple Analog Meters
  • Basic Metering -Up to 50 parameters
  • Cost Allocation / Energy Monitoring
  • Automation Integration
  • Sub-Metering
 

Communications

  • Ethernet Integrated 10 Base-T (10 Mbit/sec)
  • Modbus TCP Integrated RJ45 port 10 Base-T (10 Mbit/sec) - STANDARD
  • PROFIBUS DP expansion module - OPTIONAL
  • Modbus RTU expansion module - OPTIONAL

Digital Inputs and Outputs

  • Digital input 24 Vdc / 0.7 mA   (1)
  • Digital Output 12-24 Vdc / 10-27 mA  (1)

  SENTRON PAC3100 it’s quick and easy to get started with digital measuring systems. Our entry model supplies you with more than 30 measured values on energy consumption and basic electrical variables, dispensing with the need for a multitude of individual analog measuring instruments. Thanks to its integrated communication interface and its digital inputs and outputs, flexible system integration and adjustments in the plant are always possible with SENTRON PAC3100.

PAC3100 Power Meter  Features

  • Replace Multiple Analog Meters
  • Basic Metering -Up to 50 parameters
  • Cost Allocation / Energy Monitoring
  • Automation Integration
  • Sub-Metering
 
 

Communications


  • Modbus RTU STANDARD

Digital Inputs and Outputs

  • 2 Digital input 24 Vdc / 0.7 mA
  • 2 Digital Output 12-24 Vdc / 10-27 mA

 
 

 

   7KM PAC PROFIBUS DP expansion module
The 7KM PAC PROFIBUS DP expansion module has the following features:
• Plug-in communication module for measuring devices for connection to PROFIBUS DPV1
• 7KM PAC3200 and 7KM PAC4200
• Configurable from the front of the device or using parameterization software
• Using PROFIBUS DPV1, data can be transferred in both cyclic and acyclic modes
• Easy engineering thanks to integration in SIMATIC STEP 7 and/or simple integration via GSD file for other programming
systems
• Optimum use of process image of a control system for selection of individual measured quantities for cyclical
transfer
• All baud rates from 9.6 kbit/s up to 12 Mbit/s are supported
• Connection through 9-pole D-sub connector according to IEC 61158
• No external auxiliary power necessary
• Additional display via the device display and via LEDs on the module

   7KM PAC RS485 expansion module
The 7KM PAC RS485 expansion module has the following features:
• Plug-in 7KM PAC RS485 communication module for 7KM PAC3200 and 7KM PAC4200 measuring devices
• Configurable from the front of the device or using parameterization software.
• Support for the Modbus RTU protocol
• Plug and play
• Baud rates 4.8/9.6/19.2 and 38.4 kbit/s are supported
• Connection by means of 6-pole screw terminals
• No external auxiliary power necessary
• Status indication by LED on the module
• The 7KM PAC RS485 expansion module is required for the gateway function of the 7KM PAC4200 for communication
with simple devices with RS485 interface, such as the 7KM PAC3100, via Ethernet (Modbus TCP).